Mail

Introduction
- Driver prerequisites
Configuration
Writing mail
Sending mail templates
- Queueing mail templates
- The SendsMailTemplate model trait
Registering mail templates, layouts & partials
Mail local development

Introduction

TastyIgniter uses the Laravel Mail component to send emails. The Mail component provides a clean, simple API which allows you to send emails through a variety of drivers, including SMTP, Mailgun, Postmark and Amazon SES.

Driver prerequisites

To use the Mailgun, Postmark and Amazon SES drivers, install the required dependencies via Composer.

Mailgun

composer require symfony/mailgun-mailer symfony/http-client

Postmark

composer require symfony/postmark-mailer symfony/http-client

Amazon SES

composer require aws/aws-sdk-php

Configuration

Next, you can configure your mail settings from the Manage > Settings > Mail admin settings page or through the mail configuration file located at config/mail.php. In this file, you may configure the default mail driver, mail sending options, and mail "from" address. Next, verify that your config/services.php configuration file contains the required credentials for your mail service.

Writing mail

In TastyIgniter, you can send mail messages using either mail templates or mail views. Mail templates can be managed through the Design > Mail templates admin page. On the other hand, mail views supplied by the application or extension are stored in the resources/views directory within the extension's directory.

Optionally, you can register mail views in the Extension class with the registerMailTemplates method. This enables automatic generation of mail templates for easy customization via the admin interface.

All mail messages support using Blade and Markdown syntax for markup.

Creating mail views

Mail views are stored in the file system, and the mail code is used to represent the path to the view file. For example, sending mail with the code vendor.extension::mail.message would use the content in the corresponding file at vendor/extension/views/mail/message.blade.php.

The mail view file content can include up to 3 sections: configuration, plain text, and HTML markup. These sections are separated using the == sequence. For example:

subject = "Your order has been placed"
==
Hello {{ $customer->first_name }},

Your order has been placed successfully.

Thank you for your order.
==
<p>Hello {{ $customer->first_name }},</p>

<p>Your order has been placed successfully.</p>

<p>Thank you for your order.</p>

The configuration section sets the mail view parameters. The following configuration parameters are supported:

Parameter	Description
`subject`	the mail message subject, required.
`layout`	the mail layout code, optional. Default value is default.

The plain text section is optional, while the configuration and HTML markup sections are required.

subject = "Your order has been placed"
==
<p>Hello {{ $customer->first_name }},</p>

<p>Your order has been placed successfully.</p>

<p>Thank you for your order.</p>

Creating mail templates

Mail templates are used to define the structure of the mail message. You can create mail templates in the admin interface by navigating to Design > Mail templates. The code specified in the template is a unique identifier and cannot be changed once created.

Here is an example of a simple mail template:

subject: Your order has been placed
==
<p>Hello {{ $customer->first_name }},</p>

<p>Your order has been placed successfully.</p>

<p>Thank you for your order.</p>

Creating mail layouts

Mail layouts can be created by navigating to Design > Mail templates > Layouts in the admin interface. Mail layouts are used to define the structure of the mail message, including the header, footer, and other common elements. The code specified in the layout is a unique identifier and cannot be changed once created.

By default, TastyIgniter comes with a default mail layout that can be used as a starting point for creating custom mail layouts.

Here is an example of a simple mail layout:

<!DOCTYPE html>
<html lang="en">
<head>
    <meta charset="UTF-8">
    <meta name="viewport" content="width=device-width, initial-scale=1.0">
</head>
<body>
    <style type="text/css">
        {{ $custom_css }}
        {{ $layout_css }}
    </style>
    <header>
        <h1>{{ $subject }}</h1>
    </header>

    <main>
        {!! $body !!}
    </main>

    <footer>
        <p>&copy; {{ date('Y') }} TastyIgniter</p>
    </footer>
</body>
</html>

In this example, the layout includes a header, main content, and footer sections. The {{ $custom_css }} variable is used to include custom CSS styles in the mail layout, and the {{ $layout_css }} variable is used to include the mail layout CSS styles defined in the admin interface. The {{ $subject }} and {!! $body !!} variables are used to include the mail message subject and content, respectively.

Creating mail partials

Mail partials are reusable components that can be included in mail templates and layouts. You can create mail partials by navigating to Design > Mail templates > Partials in the admin interface. The code specified in the partial is a unique identifier and cannot be changed once created.

Here is an example of a simple mail partial:

name = "Footer"
==
-------------------
{{ $slot }}
==
<p>{{ $slot }}</p>

You can include the mail partial in a mail template or layout using the @partial directive:

@partial('footer')
<p>&copy; {{ date('Y') }} TastyIgniter</p>
@endpartial

Mail variables

You may access all the data passed to the mail view or template by using the {{ $variable }} syntax. For example, if you pass a $customer_name variable to the mail view, you can access it in the view like this:

<p>Hello {{ $customer_name }},</p>

Attachments

You can attach files to your emails using the attach method on the Mail facade. The attach method accepts the full path to the file as its first argument:

use Illuminate\Support\Facades\Mail;

Mail::send('vendor.extension::mail.message', $data, function($message) {
    // ...
    $message->attach('/path/to/file');
});

Inline Attachments

To embed media in your emails, you can use the embed method on the $message variable:

<body>
    <img src="{{ $message->embed($imagePath) }}">
</body>

Embedding Raw Data

To embed raw data in your emails, you can use the embedData method on the $message variable. This method accepts the raw data and the name of the file as its first and second arguments, respectively:

<body>
    <img src="{{ $message->embedData($data, 'name.jpg') }}">
</body>

Sending mail templates

To send a mail template in TastyIgniter, you can use the sendTemplate method on the Mail facade. This method accepts the code of the mail template, an array of data to pass to the view, and a closure that receives a message instance which allows you to customize the recipients, subject, and other aspects of the mail message:

use Igniter\System\Helpers\MailHelper;

$data = [];

MailHelper::sendTemplate('vendor.extension::mail.message', $data, function($message) use ($customer) {
    $message->to($customer->email, $customer->name);
});

Queueing mail templates

To queue a mail message, you can use the queueTemplate method on the Mail facade. This method will automatically push the email onto the queue, so it will be sent in the background by a queue worker. This can help to improve the response time of your application by offloading the sending of the email to a background process:

use Igniter\System\Helpers\MailHelper;

$data = [];

MailHelper::queueTemplate('vendor.extension::mail.message', $data, function($message) use ($customer) {
    $message->to($customer->email, $customer->name);
});

The `SendsMailTemplate` model trait

The SendsMailTemplate trait provides a convenient way to send mail templates from a model. To use this trait, add it to your model class and define the mailGetData method that returns the mail template variables:

use Igniter\Flame\Mail\SendMailTemplate;

class Order extends Model
{
    use SendMailTemplate;

    public function mailGetData()
    {
        return [
            'customer' => $this->customer,
        ];
    }
}

You can use the mailGetRecipients method to define the recipients of the mail message. The mailGetRecipients method accepts a single $recipientType parameter and returns an array of recipients, where each recipient is an array containing the email address and name of the recipient.

public function mailGetRecipients($recipientType)
{
    return [
        [$this->customer->email, $this->customer->name],
    ];
}

You may also customise the reply-to address by defining the mailGetReplyTo method:

public function mailGetReplyTo()
{
    return [$this->customer->email, $this->customer->name];
}

To send the mail message, use the mailSend method on the model instance, where the first parameter is the mail template code, and the second parameter is the recipient type:

$order = Order::find(1);

$order->mailSend('vendor.extension::mail.message', 'customer');

Possible values for the recipient type are customer, location or admin.

Registering mail templates, layouts & partials

To register mail templates, layouts, and partials in the Extension class, you can use the registerMailTemplates, registerMailLayouts, and registerMailPartials methods, respectively. These methods allow you to define the mail templates, layouts, and partials that your extension provides, making them available for customization via the admin interface:

public function registerMailTemplates(): array
{
    return [
        'vendor.extension::mail.message' => 'Registered mail template message',
    ];
}

public function registerMailLayouts(): array
{
    return [
        'vendor.extension::mail.layouts.default' => 'Default Layout',
    ];
}

public function registerMailPartials(): array
{
    return [
        'vendor.extension::mail.partials.footer' => 'Footer partial',
    ];
}

Mail local development

When developing locally, you may want to catch all outgoing mail messages and display them in the browser instead of sending them. You can use the log mail driver to log all outgoing mail messages to the log file. To enable this driver, set the MAIL_DRIVER environment variable to log in your .env file:

MAIL_DRIVER=log

Select A Version

#Introduction

#Driver prerequisites

#Mailgun

#Postmark

#Amazon SES

#Configuration

#Writing mail

#Creating mail views

#Creating mail templates

#Creating mail layouts

#Creating mail partials

#Mail variables

#Attachments

#Inline Attachments

#Embedding Raw Data

#Sending mail templates

#Queueing mail templates

#The SendsMailTemplate model trait

#Registering mail templates, layouts & partials

#Mail local development